Phone: +65 6299 8388
Fax: +65 6299 6388

HomeProductsServicesApplicationsLiterature DownloadsAbout UsContact Us
Main Image

Wire Mesh Mist Eliminators

Construction Materials:

  • Stainless steels, duplex steel
  • Alloy C276, 400, 625, 825, 20, etc...
  • Plastics (PP , FEP , ET FE, ECTFE)
  • Fibrous components (PT FE, Polyester, Glass fibres)

Typical Applications:

There is a very large range of applications which are mainly in the following fields:
  • Knock-out drums
  • Evaporator systems
  • Scrubbing systems and absorbers
  • Glycol dehydration
  • Gas processing
  • Inert gas scrubbers
  • Sulphuric acid drying towers
  • Sulphur condensers
  • Steam drums
  • Inlet separators
  • Turbo-expander suction drums
  • Dew-point separators
  • Compressor suction drums
  • MS F/ME D desalination


Wire Mesh Mist Eliminators are easy to install cost effective separators that are able to collect liquid particles 2 to 10 microns in diameter with essentially 100% efficiency if designed properly to the process conditions. They are available in almost any size or shape and can be manufactured in a broad range of metals or plastics.

They are produced as multiple layers of knitted mesh making it a dense pack and presenting a large surface area to the droplets entrained in the gas stream. The separation of the droplets is achieved by impingement on, and capture by, the wires of the mesh where the droplets coalesce and drain. Most of the wire mesh mist eliminators are supplied complete with rigid open area support grids allowing direct installation onto support structures such as beams and rings. The mist eliminator is made out of sections allowing easy handling and access through the vessel man ways. Additional accessories such as tie wire, bolting, clamps and support beams can be delivered if needed.


  • High collection efficiency
  • Low installed cost
  • Low pressure drop
  • Fast delivery and service
© Copyright 2024 Omega Separations PTE Ltd. Powered by Kentico CMS for ASP.NET.